NTN BEARING-SUDAMERICANA, S.A.
NTN BEARING-SUDAMERICANA, S.A.
Angular contact ball bearing   Ball bearing   Bearing unit  
English
English
  • Home
  • Stock Categories
    • Angular contact ball bearing
    • Ball bearing
    • Bearing unit
    • Complex bearing
    • Cylindrical roller bearing
    • Linear bearing
    • Needle bearing
    • Plain bearing
    • Self-aligning ball bearings
    • Spherical roller bearings
    • Tapered roller bearings
    • Thrust ball bearings
    • Thrust roller bearings
    • Wheel bearings
    • Timken Bearing
    • 35tac72 Bearing
    • nsk 6200 Bearing
    • nsk 608v Bearing
    • ntn 6306 Bearing
    • Kaydon Slewing Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Wide Series Cylindrical Roller Bearings
    • Full Complement Cylindrical Roller Bearings
    • Cylindrical Roller Bearings
    • Deep Groove Ball Bearings
    • Thk Linear Guide
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
  • Technical Articles
  • Angular contact ball bearing
  • Ball bearing
  • Bearing unit
✖

Home

Stock Categories

Technical Articles

Angular contact ball bearing

Ball bearing

Bearing unit

Home>Products>Thk Linear Guide>HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]M THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]M THK Standard Linear Guide Accuracy and Preload Selectable HSR Series
  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]M THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

THK HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1] MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]M THK Standard Linear Guide Accuracy and Preload Selectable HSR Series

category

Thk Linear Guide

THK HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1] Bearing SPECIFICATIONS

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]M THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Deal is your source Bearings Category for OEM Thk Linear Guide NTN BEARING-SUDAMERICANA, S.A. and accessories. We sell GenuineThk Linear Guide at discount prices.

  • THK

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]

  • Bearings
  • 0.0
  • N/A
  • B04144
NTN BEARING-SUDAMERICANA, S.A.

NTN BEARING-SUDAMERICANA, S.A.China

  • NTN BEARING-SUDAMERICANA, S.A.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]M THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Specification details

  • Bearings
  • 0.0
  • N/A
  • 0
  • B04144

THK HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1] HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]M THK Standard Linear Guide Accuracy and Preload Selectable HSR Series specification

Basic static load rating C09150 kN
Ca min.10.7 mm
Mass bearing271 kg
s1 max.20.2 mm
Da min.487 mm
Da max.560 mm
Fatigue load limit Pu680 kN
Basic dynamic load rating C5600 kN
ra max.4 mm
r1,2 min.5 mm
d340 mm
Limiting speed900 r/min
Operating clearance factor k20.096
Reference speed670 r/min
B243 mm
d2 ≈403 mm
D1 ≈514 mm
D580 mm

Together HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]M THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Application

No.BrandmDCbBdFwC0
15BM2116KOYO - 21 mm13,4 kN - - 1515 mm24,2 kN
15BTM2116KOYO - 21 mm9,8 kN - - 1515 mm13,6 kN
15MKM2116KOYO - 21 mm9,8 kN13,3 mm - 1515 mm13,6 kN
15MM2116KOYO - 21 mm13,4 kN13,7 mm - 1515 mm24,2 kN
20204ISO - 47 mm14 mm - 14 mm20 mm - -
20204 CLoyal - 47 mm20,4 kN - 14 mm20 mm - 19,3 kN
20204-TVPFAG0,114 kg / Weight47 mm - - 14 mm20 mm - -
20205ISO - 52 mm15 mm - 15 mm25 mm - -
HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]M+[116-2020/1]L[H,​P,​SP,​UP]MTHK - - - - - - - -
HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]C[0,​1]M+[116-2020/1]LMTHK - - - - - - - -
HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]MTHK - - - - - - - -

 

9RSR3WNUUC1+[25-480/1]LPM THK Miniature Linear Guide Full Ball RSR SeriesAccessories:No Shield, no Seal; Basic Dynamic Radial Load Rating C:168000 N; d:75.000 mm; D:160.0000 mm; Basic Static Radial Load Rating Co:140000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3600 rpm; Grease Speed Rating n1:2600 rpm; B:68.30 mm; Sealed Speed Rating n3:2600 rpm;
2SRS7WGM+[33-300/1]L[H,​P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload SelectableH2:33.337 mm; H1:57.15 mm; d2:73.819 mm; J min.:174.625 mm; B:73.025 mm; A1:80.169 mm; Mass bearing unit:4.76 kg; J max.:180.975 mm; Basic dynamic load rating C:84.5 kN; S:0.794 mm; Limiting speed:5000 r/min; Attachment bolt diameter G:15.875 mm; H:114.3 mm; s:25.4 mm; L:225.425 mm; da:49.212 mm; A:
9RSR14WVMC1+[65-1800/1]L[H,​P]M THK Miniature Linear Guide Full Ball RSR Seriesr1,2 min.:2 mm; Comparative axial load rating CFa:236 kN; D:595 mm; d1 ≈:480 mm; Calculation factor Y0:2; Basic dynamic load rating C:5940 kN; r3,4 min.:6 mm; T:404 mm; Mass bearing:305 kg; Design variant/feature:TQOSN/GWISI; Calculation factor e:0.33; Comparative radial load rating CF:1460 kN
9RSR3WNUU+[25-480/1]LPM THK Miniature Linear Guide Full Ball RSR SeriesR1:163.512 mm; N1:41.275 mm; L:869.95 mm; PG:1/4 NPT; Housing:SAFS 640; H2:101.6 mm; H1:250.825 mm; PosiTrac Plus contact element:2 x B10724-161; P120°:249 kN; Labyrinth ring:2 x LOR 666; Ca:147.803 mm; Eye bolt:2 x 1/2-13 UNC; Stabilizing ring:SR-0-40; End plug (suffix Y):EPR 21; Cap bolt, SAE
9RSR14WVMC1+[65-1800/1]LM THK Miniature Linear Guide Full Ball RSR SeriesFatigue load limit Pu:2.4 kN; Mass needle roller and cage assembly:0.012 kg; Basic dynamic load rating C:12.5 kN; Limiting speed:22000 r/min; Fw:20 mm; Basic static load rating C0:20.8 kN; Reference speed:20000 r/min; U:17 mm; Ew:24 mm;
2SRS7WGMC1+[33-300/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload SelectableS:4.763 mm; P180°:42.7 kN; H1:114.3 mm; Cap bolt:2 x 3/4-10 UNC; P120°:39.1 kN; R1:65.088 mm; Ca:69.799 mm; da:73.025 mm; Cap bolt recommended tightening torque:515.2 N·m; P150°:35.6 kN; Max. speed for Taconite seal:1050 r/min; Initial grease fill:181.44 g; N1:22.225 mm; J1:60.325
9RSR14WVM+[65-1800/1]LM THK Miniature Linear Guide Full Ball RSR SeriesG2:G 1/4; B1:332 mm; A:9 mm; G:Tr 480x5; Mass withdrawal sleeve:50 kg; d:460 mm; B2:355 mm; d1:440 mm; Hydraulic nut:HMV 96 E; G1:32 mm;
9RSR14WVM+[65-1800/1]L[H,​P]M THK Miniature Linear Guide Full Ball RSR SeriesPosiTrac Plus contact element:2 x B10724-102; P120°:52.5 kN; da:88.9 mm; PG:1/4 NPT; P60°:141 kN; ba:44.45 mm; R1:58.737 mm; A2:155.575 mm; P150°:48 kN; P90°:84.5 kN; Max. speed for PosiTrac Plus seal:1650 r/min; S:4.763 mm; L:387.35 mm; Mass pillow block:21.8 kg; Ca:55.804 mm; H2:44
9RSR3WNUUC1+[25-480/1]LM THK Miniature Linear Guide Full Ball RSR SeriesTolerance shaft:h8; d:90 mm; D:105 mm; Mass bushing:1.16 kg; B:80 mm; Coefficient of friction µ max.:0.1; Permissible sliding velocity v min.:0.25 m/s; Tolerance housing:H7; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; Coefficient of friction µ
9RSR3WNUU+[25-480/1]LM THK Miniature Linear Guide Full Ball RSR SeriesAccessories:Two Seals; Fillet Radius ra:2.00 mm; B:39.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Oil Speed Rating n2:4500 rpm; Basic Dynamic Radial Load Rating C:124000 N; D:170.0000 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; d:80.000 mm; Grease Speed Rating n1:3800 rpm; Sealed Speed
2SRS7WGMC1+[33-300/1]L[H,​P]M THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload SelectableBall diameter Dw:4.762 mm; B:9 mm; da max.:30.1 mm; Static axial stiffness, preload class B:32 N/µm; d:25 mm; d2:30.6 mm; Calculation factor f:1.07; D2:39.15 mm; D:42 mm; Preload class D GD:200 N; Calculation factor fHC:1; d1:30.6 mm; Static axial stiffness, preload class D:62 N/µm; r3,4
2SRS7WGM+[33-300/1]LM THK Miniature Linear Guide Full Ball SRS-G Accuracy and Preload SelectableL:212.725 mm; B:73.025 mm; A1:77.787 mm; Attachment bolt diameter G:15.875 mm; s:25.4 mm; da:50.8 mm; J max.:174.625 mm; Basic dynamic load rating C:84.5 kN; H1:57.15 mm; S:0.794 mm; Mass bearing unit:4.13 kg; J min.:150.813 mm; H:117.872 mm; H2:34.925 mm; Limiting speed:5000 r/min; A:58.737 mm; d2:

 

 

HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]L[H,​P,​SP,​UP]M THK Standard Linear Guide Accuracy and Preload Selectable HSR Series Video

 

THK HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1] INTERCHANGE

Thk Linear Guide Part series HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1] is a potential replacement for these common bearing part numbers:

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]

  • HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1]

Contact Us

NTN BEARING-SUDAMERICANA, S.A.
AddressWorld Trade Center Panamá, Piso 16. Oficina 1601, Urbanización Marbella, Calle 53 Este, Apartado Pos
Phone(Working Time)269-5687
Fax
  • NTN BEARING-SUDAMERICANA, S.A.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

THK HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1] Technical Articles

40x75x26 bearing table
33108 Taper Roller Wheel Bearings 40x75x26 33108 | eBay33108 Taper Roller Wheel Bearing, it is able to carry radial and axial load in one direction simultaneously (cone + cup), this is a popular size that could be used  Tapered roller bearing...
35x80x31 bearing size pdf file
2307ETN9 - SKF Double Row Self-Aligning Bearing - 35x80x31Product: 2307ETN9 | Brand: SKF | Size: 35x80x31 | In Stock | Same Day Despatch | All Orders Shipped via DHL | Quality Bearings Online 4307 Bearing Double Row Open 35x80x31 Metric Ball...
20x27x4 bearing dimensions
6704-2RS Bearing 20x27x4 Sealed Ball Bearings VXB Brand6704-2RS Sealed Ball Bearing 20mm x 27mm x 4mm 6704-2RS Double Sealed Ball Bearing, Bearing is made of Chrome Steel, Bearing inner diameter is  FastEddy Bearings 20x27x4 Rubber Sealed 10...

Thk Linear Guide CATEGORIES

  • Angular contact ball bearing
  • Ball bearing
  • Bearing unit
  • Complex bearing
  • Cylindrical roller bearing
  • Linear bearing
  • Needle bearing
  • Plain bearing
  • Self-aligning ball bearings
  • Spherical roller bearings
  • Tapered roller bearings
  • Thrust ball bearings
  • Thrust roller bearings
  • Wheel bearings
  • Timken Bearing
  • 35tac72 Bearing
  • nsk 6200 Bearing
  • nsk 608v Bearing
  • ntn 6306 Bearing
  • Kaydon Slewing Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Bearing Slewing Ring
  • Wide Series Cylindrical Roller Bearings
  • Full Complement Cylindrical Roller Bearings
  • Cylindrical Roller Bearings
  • Deep Groove Ball Bearings
  • Thk Linear Guide
  • Thk Miniature Linear Guide
  • Thk Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • Thk Linear Bearings And Rails
  • Thk Linear Motion
More

Customers Who Viewed THK HSR25HA[1,​2,​3,​4,​5,​6,​7,​8,​9][DD,​DDHH,​KK,​KKHH,​LL,​RR,​SS,​SSHH,​UU,​ZZ,​ZZHH]M+[116-2020/1] Bearing Also Viewed

  • 9RSR14WVMC1+[65-1800/1]LM THK Miniature Linear Guide Full Ball RSR Series
  • 9RSR14WVM+[65-1800/1]LM THK Miniature Linear Guide Full Ball RSR Series
  • 9RSR3WNUUC1+[25-480/1]LPM THK Miniature Linear Guide Full Ball RSR Series
  • 9RSR3WNUUC1+[25-480/1]LM THK Miniature Linear Guide Full Ball RSR Series
  • 9RSR3WNUU+[25-480/1]LPM THK Miniature Linear Guide Full Ball RSR Series

Top Products

Timken m88048 Take Up Unit Bearings Timken l44643 Take Up Unit Bearings Timken jlm104910 Take Up Unit Bearings
Timken hm212011 Take Up Unit Bearings Timken l44649 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

NTN BEARING-SUDAMERICANA, S.A.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • Angular contact ball bearing
    • Ball bearing
    • Bearing unit
    • Complex bearing
    • Cylindrical roller bearing
    • Linear bearing
    • Needle bearing
    • Plain bearing
    • Self-aligning ball bearings
    • Spherical roller bearings
    • Tapered roller bearings
    • Thrust ball bearings
    • Thrust roller bearings
    • Wheel bearings
    • Timken Bearing
    • 35tac72 Bearing
    • nsk 6200 Bearing
    • nsk 608v Bearing
    • ntn 6306 Bearing
    • Kaydon Slewing Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Wide Series Cylindrical Roller Bearings
    • Full Complement Cylindrical Roller Bearings
    • Cylindrical Roller Bearings
    • Deep Groove Ball Bearings
    • Thk Linear Guide
    • Thk Miniature Linear Guide
    • Thk Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • Thk Linear Bearings And Rails
    • Thk Linear Motion
  • Technical Articles
  • Angular contact ball bearing
  • Ball bearing
  • Bearing unit
✖

Home

Stock Categories

Technical Articles

Angular contact ball bearing

Ball bearing

Bearing unit

Contact Us