ISO Q328 Angular contact ball bearing

G2:G 1/8; d3:920 mm; Mass adapter sleeve assembly:269 kg; B:90 mm; Hydraulic nut:HMV 160E; Locking device:MS 30/800-750; d1:750 mm; d:800 mm; G3:13 mm; B5:112 mm;

d:110.000 mm; Accessories:Shield & Seal & Snap; Basic Static Radial Load Rating Co:305000 N; Grease Speed Rating n1:1700 rpm; Basic Dynamic Radial Load Rating C:291000 N; Sealed Speed Rating n3:1700 rpm; B:92.10 mm; Fillet Radius ra:2.50 mm; D:240.0000 mm; Oil Speed Rating n2:2400 rpm;

Accessories:Snap-Ring; Oil Speed Rating Open/Shielded n2:3200 rpm; Basic Dynamic Radial Load Rating C:190000 N; D:210.0000 mm; B:52.00 mm; Grease Speed Rating Open/Shielded n1:2600 rpm; d:85.000 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:200000 N;

J:1000 mm; P120°:3400 kN; Lock washer:MS 3084; ATS:470 mm; N1:48 mm; Da:700 mm; Initial grease fill, 40%:15 kg; db:450 mm; N4 max.:35 mm; Taconite seal:2 x TK 96;

Width - Inner Ring B1:39.69 mm; Accessories:300SWI Non-Filling N; Diameter E:61.1 mm; Basic Radial Load Rating-Static SCO:31500 N; Fillet Radius ra:1.50 mm; Speed Rating-Open and Shielded-Oil OSO:8000 rpm; D:100.0000 mm; Width - Outer Ring B0:25.0 mm; d:45.000 mm; Speed Rating-Open and Shielded-Grea

Basic Dynamic Radial Load Rating C:52300 N; d:35.000 mm; Accessories:Two Seals; Basic Static Radial Load Rating Co:48000 N; Sealed Speed Rating n3:5600 rpm; B:34.90 mm; D:80.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:5600 rpm;

D:500.0000 mm; Fillet Radius ra:4.00 mm; Basic Static Radial Load Rating Co:2000000 N; Fillet Radius rb:1.50 mm; d:280.000 mm; Grease Speed Rating n1:1000 rpm; B:160.00 mm; Basic Dynamic Radial Load Rating C:936000 N; Oil Speed Rating n2:1400 rpm;

Ca min.:4 mm; rb max.:2.5 mm; Da max.:85 mm; Dimension series:LM 508700; Fatigue load limit Pu:15 kN; T:24 mm; Mass bearing:0.62 kg; B:24 mm; db min.:76 mm; Da min.:84 mm;

Db:25.6 mm; ra max.:0.3 mm; da:28.4 mm; E:29 mm; Mass bearing:0.076 kg; r1,2 min.:0.3 mm; B:17 mm; D:35 mm; Limiting speed:18000 r/min; Basic dynamic load rating C:14.2 kN;

Basic Static Radial Load Rating Co:20000 N; Accessories:One Shield & Snap-Ri; Oil Speed Rating n2:12000 rpm; Fillet Radius ra:1.00 mm; D:52.0000 mm; Grease Speed Rating n1:8500 rpm; Sealed Speed Rating n3:8500 rpm; Basic Dynamic Radial Load Rating C:23800 N; B:22.20 mm; d:20.000 mm;

Shielded or Sealed B1:7.9 mm; D:28.6000 mm; Grease Speed Rating Open/Shielded n1:24000 rpm; Width Plain B:6.4 mm; Oil Speed Rating Open/Shielded n2:29000 rpm; Fillet Radius ra:0.41 mm; d:12.700 mm; Sealed Speed Rating n3:16000 rpm; Basic Dynamic Radial Load Rating C:5070 N; Basic Static Radial Load

Q120°:1800 kN; N1:28 mm; P180°:1100 kN; Q180°:900 kN; Da:310 mm; H:375 mm; A1:210 mm; P55°:2700 kN; Appropriate attachment bolt, rec. tightening torque:665 N·m; da:150 mm;

Calculation factor Y:1.9; B:22.225 mm; Calculation factor e:0.31; a:20.688 mm; Basic dynamic load rating C:94 kN; Cb min.:5 mm; Limiting speed:7500 r/min; Basic static load rating C0:91.5 kN; Mass bearing:0.58 kg; d1 ≈:66.25 mm;

d1:133.35 mm; d:150 mm; Threads per inch:12; G:149.555 mm; B1:88.443 mm; Lock nut:N 030; B4:27.788 mm; Lock washer:W 030; Sleeve:S 3030x5.1/4; d3 max.:181.102 mm;

P120°:3400 kN; Cap bolt, rec. tightening torque:850 N·m; J1:260 mm; Bearing (basic designation):23276 K; Mass housing:709 kg; ba max.:238 mm; H1:410 mm; Initial grease fill, 20%:8.9 kg; Adapter sleeve:OH 3276 H; Locating ring:2 x FRB 10/680;